This is the perfect set up for anyone looking to get serious about residential window cleaning. This upgraded entry-level kit is designed for those looking for more water flow for faster rinsing in all water conditions. Like all of our RO/DI systems this system includes your first set of pre-filter and post-filters FREE of charge so you’re not left stranded on the job when your first filters go bad.
This bundle includes our:
A Wood Cone Tip for ACME Tip
The Tucker® RIVAL RO/DI System
RIVAL by Tucker® Stainless Steel 4-Stage RO/DI System – MADE IN USA
The RIVAL Cart is a 4-stage Pure Water system that comes on a powder coated lightweight steel frame made for years of abuse. The new Tucker® combination sediment/carbon pre-filter makes this a 4-stage filtration system!
Large flat-free tires help you navigate all terrains.
System consists of:
(1) Sediment/Carbon pre-filter for removal of harsh chlorine, chloramine, and sediment.
(1) Rival Series reverse osmosis membrane.
(1) Refillable DI Filter for an ultra pure final polish of your pure water.
Tucker® 150′ Hose Reel w/ premium pure water hose
New hose reel from Tucker®.
The Highest quality hand carry hose reel on the market today.
Made of powder coated laser cut steel and machined aluminum.
Assembled in the USA. Comes complete with 150′ of 3/8″ premium hose line.
3/4″ Brass garden hose inlet.
3/4″ Brass garden hose outlet.
Tucker® ECO-30 Pole – Bare
Made from 100% high-grade carbon fiber, this water fed pole can extend to a height of 25’ (brush to cap). These poles are perfect for ground level up to 3rd floor residential work. Carbon fiber gives this pole a superior rigidity while maintaining an amazingly light weight.
Tucker® Junior Pole – Bare
The Tucker®-JUNIOR Water Fed Pole is a 3 section ground-level pole designed to reach windows up to 15 feet in height. Made from a blend of standard modulus carbon fiber and fiberglass, this pole still maintains a good rigid frame at an ultra low cost. The Tucker®-JUNIOR collapses to a height of 52 inches, and weighs in at only 2 pounds, even with a window cleaning brush attached.
Tucker® Dual Trim Nylon Water Fed Brush with 2 Pencil Jets
This light weight, general purpose water fed brush is ideal for any skill level window cleaner. Nylon is an excellent tip to glass cleaning material, and when the fibers are laid down on the glass, they glide across the surface easily. This dual trim brush splits the best of both worlds by allowing the window cleaning professional to lay the longer outer edges of the brush against glass, allowing the brush to move freely and easily, while the inner monofilament bristles remain in a vertical position allowing the friction from the tips to scrub away caked on dirt and grime. The splay of the outer bristles also allows the bristle tips to scrub into the corners and trim of the window.
Tucker® Standard Size Boar Hair Water Fed Brush with 4 Pencil Jets
Designed for experienced window washers, this American made water fed brush is made from natural boar bristles for a superior clean. The natural fibers of the boar bristle clean and scrub regardless of their orientation. This allows the seasoned professional to clean into corners and crevices by splaying the fibers of the brush out and utilizing the entire surface of the boar bristles. This brush comes with 4 separately plumbed pencil jets, creating direct streams of high-pressure water that powers away grime. Pencil jets are perfect for situations where a deeper level of cleaning is needed, and a higher water pressure is desired directly on the glass to minimize physical strain by the operator.
Tucker® Standard Size Hybrid Water Fed Brush with 2 Pencil Jets
Our dual trim, hybrid water fed brushes are the ultimate glass cleaning brush for solar panel and window cleaning businesses. This hybrid, dual trim brush has bristles that are longer on the outer edge of the brush, allowing the operator to splay the bristles into corners and sides of the glass. The shorter, inner bristles remain upright and allow the tip of the bristle fiber to continue scrubbing directly on inner surface of the glass. This brush comes with 2 individually plumbed pencil jets, which help direct a high-pressure stream of water that assists the brush operator by blasting away stubborn dirt.
Tucker® Standard Size Over The Top Rinse Bar
The Tucker® Over the Top Rinse Bar is made of high quality lightweight plastic and guaranteed to perform the way it should from day one. The water flow covers the entire width of the brush. Easily attaches to any of the USA Made Tucker® brushes. *Not designed for other brand brushes.
Tucker® Mini Scrubber
This Mini Scrubber from Tucker® is made to thread onto the male acme tip of our plastic adjustable Reach Around Goosenecks. This is an excellent solution for bird and bee droppings, caked on dust, and other tough jobs. Comes with one replacement 4.5″ wide pad. Extra walnut scrub pads for this scrubber are available HERE.
Male & Female Quick Connect For Pole Hose And Garden Hose
Male and female quick connect with shutoff valve to attach 5/16 inch pole tubing directly to water system outlet or hose reel. The anodized aluminum male quick connect have a PTF replaceable union fitting built in. The female quick connect uses garden hose threads simply thread onto the end of your garden hose fitting.
Tucker® Reach Around Gooseneck w/ Quick Release For #1 Clamp
The Tucker® Reach Around Gooseneck is designed to fit onto the tip of your Tucker® water fed pole. This design uses a quick release stem that attaches to the #1 clamp of your Tucker® pole for easy adjustment.
This attachment accepts Tucker® brushes threaded onto the euro male thread and standard ACME threaded accessories which can be attached via the ACME male thread.
Tucker® Swiveling Gooseneck w/ Quick Release For #1 Clamp
The Tucker® swiveling gooseneck is a must have for any professional looking to tackle odd angles with their water fed pole. The swivel moves from side to side and can easily be adjusted to make the swivel action loose or rigid, depending on the operators preference. This design uses a quick release stem that attaches to the #1 clamp of your Tucker® pole for easy adjustment. Made in USA of strong plastic material, these goosenecks are proven to last.
100′ Of 5/16″ OD Tucker® Pole Hose
Looking for a pole hose that doesn’t kink or puncture easily? This is the absolute best pole hose you can buy. Hundreds of thousands of feet of this product have been sold. Outside diameter is 5/16″ meaning it fits the push to fit style tee fittings on all the euro pole brushes, not just Tucker®.
Inline Ball Valve for 5/16″ OD Tucker® Pole Hose
Small inline ball valve for 5/16″ OD pole hose tubing. Simply cut your line where you would like to install the valve and push the valve to fit into place. NEW and IMPROVED design!
Plastic ACME Tip For #1 Clamp
The all new Tucker® ACME tip is designed to fit into the top of the new Tucker® T1 clamp on all Tucker® carbon fiber water fed poles.
Simply add this to the tip of your pole by inserting it into the new Tucker® T1 clamp and you have affectively converted your water fed pole into a trad pole.
Wood Cone Tip for ACME Tip
This wood cone tip is the ideal solution for attaching squeegees, mops, etc. to your pole.
Gutter Hawg – Gutter Scoop Tool
The Gutter Hawg tool is an excellent solution for homeowners and professional contractors looking to increase efficiency and safety while cleaning debris from gutters. This is a heavy-duty tool that can minimize your time spent on the ladder and maximize your ability to get the job done. Use the scoop to maneuver debris along the gutter and the hook to easily get debris by gutter hangers and within reaching distance of your bucket.
Designed to easily get debris under those pesky gutter hangers and for difficult or awkward gutter cleaning situations. It will save you time and the inconvenience of moving your ladder every few feet. You can also use it to clean behind structures on the roof such as skylights. You can easily hang the tool on your ladder, thereby allowing you to climb safely with both hands.
All RHG and Tucker® brand purification systems, pole sections, and clamps come with a 5 year warranty and are assembled in the US.